Aps thunder b airsoft sound grenade

THUNDER B AIRSOFT SOUND GRENADE

MANUFACTURER APS
MODEL TB-03
MATERIAL ABS / METAL

THIS IS A NEW GENERATION AIRSOFT GRENADE THAT EMITS NOISE AND SMOKE. ITS FUNCTIONING IS VERY SIMILAR TO A REAL GRENADE.

IT KEEPS A STANDARD 12g CO2 CARTRIDGE IN A FULLY SEALED COMPARTMENT, UPON THE PIN PULLED, THE FIRE LEVER WILL START RELEASING THE PRESSURE FROM THE CARTRIDGE UNTIL THE SHELL BREAKS.

THIS GRENADE FEATURES A REINFORCED TOP AND BOTTOM, WHICH ENSURES THE GRENADE TO BREAK IN THE CENTER AND NOT TO EXPAND ANY PIECES.

THUNDER B CREATES NOISE LEVEL OVER 130db, IT IS THE NOISE LEVEL OF AN OPERATING PNEUMATIC DRILL OR A PLANE FLYING ABOVE YOUR HEAD, BE ALLERT WHEN USING IT.

SINCE THUNDER B DOES NOT CONTAIN ANY GUN POWDERS, WHICH MEANS YOU DON'T HAVE TO WORRY ABOUT THE FIRE HARM WHEN IT BLEW UP.

THIS GRENADE CAN BE ATTACHED TO TACTICAL VEST OR JACKET. ITS COLOUR AND SHAPE, FUNCTIONING AND HANDLING ARE VERY SIMILAR TO A REAL GRENADE, WHICH MAKES IT POSSIBLE TO USE DURING MILITARY DEMONSTRATIONS.

PACKAGE INCLUDES:
GRENADE
2 SAFETY PINS
2 EXTERNAL CYLINDER SHELLS
1 PINEAPPLE SHELL
MANUAL

ITS POSSIBLE TO INSERT POWDER OR FLOAR INSIDE THE GRENADE IN ORDER TO CREATE A SMOKE EFFECT.

HOW TO USE:
1. SCREW THE END CAP TO THE CILYNDER COVER
2. INSERT 12g DISPOSAL GAS INTO CYLINDER COVER
3. PUSH THE RUBBER FIXER INTO THE CYLINDER COVER BY TOOL (FIRE LEVER)
4. LOCATE THE TOP HOLE OF THE HAMMER BY A 3mm TOOL
5. PULL THE HAMMER ALL THE WAY DOWN BY THE 3mm TOOL, INSERT SAFETY PIN IN THE REAR PIN HOLE TO LOCK THE HAMMER POSITION
6. PRESS AND HOLD THE FIRE LEVER, EJECT SAFETY PIN AND INSERT IT TO THE FRONT PIN HOLE, MAKE SURE THE HAMMER HEAD DID NOT BOUNCED BACK AT THIS STAGE
7. SCREW THE CYLINDER COVER TO THE INSTALLED STRIKER HEAD
8. SCREW THE HOLE PART TO THE THUNDER B SHELL

*PLEASE, USE IT WITH EXTREME CAUTION ON THE OPEN SPACE, AWAY FROM PEOPLE*

**YOU MUST BE AT LEAST 18 YEARS OLD TO PURCHASE AND OPERATE THUNDER B**

{youtube}xatFbyzcTgw{/youtube}