MOSFET V2 Rear Cables - Leviathan by JeffTron

MOSFET V2 with Rear Cables
Leviathan brand

Main features:
MOSFET controlled by a processor with wireless communication
Allows you to add new shooting modes, ROF (Rate of Fire) control, Spring Pre-Load, Active Braking, low battery indication, statistics and much more
controllable from ios and android smartphone application
Replaces the original trigger contacts inside the Gearbox Version 2
INCLUDES Rear Cables with Mini Fuse and Dean-T connector, no soldering is required for installation
INCLUDES 1 Black CNC Speed ​​Trigger

Main functions:
- Adds new independent firing modes for each selector position (Safe - Semi - Auto)
- Three adjustable bursts (2 to 20 shots)
- Firing speed can be reduced to 40%, adds breaks between shots to reduce ROF, provides quick trigger response even with very low firing speed, just like in a real pistol
- Active Braking with adjustable strength (can be disabled)
- Spring Pre-Load Function for instantaneous shooting on Semi-Automatic fire
- Delay between shots adds time in which no firing is possible to simulate the delay in reloading or recoil of the weapon (0.1 to 4.0 seconds)
- The electronic fuse allows the detection of high currents to avoid damage if something does not work properly
- Low battery indication for 2s - 4s li-po and 3s - 4s li-fe
- The statistics screen shows:
a) firing data with cycle times
b) the energy consumption of the engine
c) the firing speed
d) the temperature of the MOSFET
e) allows you to make a perfect setting of the Gearbox
- The app shows the current battery voltage value. the colored lines indicate the state of charge of the battery
- User can save multiple settings in profiles
- The application is constantly updated for bug fixes and the inclusion of new features
- There are three shot counters.
a) Total Counter: which indicates the total number of shots fired during the entire life of the device.
b) User Counter: which can be reset at any time by the user.
c) Power-up Counter: which is reset at each battery connection.
- There is an error log which records all errors that occurred during the entire life of the device
- For greater security, the wireless connection can be disabled using the selector
- The device continuously monitors current, voltage and temperature to avoid damage in case of problems
- The motor vibrates and beeps as feedback to the user
- Programming settings are saved inside the device and are not lost when the battery is disconnected or the connection with the Smartphone is lost

Firing Modes: Independently settable for each selector position (Safe - Semi - Auto)
- Safe: no response to trigger pull
- Semi: fires a single shot with each pull of the trigger
- Semi / Burstx: A short pull of the trigger fires a single shot, the long press fires the burst x
- Binary trigger: fires a single shot when the trigger is pulled and another single when released
- Burstx: fires a burst with each pull of the trigger
- Burstx + bursty: a short pull of the trigger fires the x burst, the long press fires the y burst
- Burstx / Full: a short pull of the trigger fires the burst x, the long press fires full-auto
- Full: continuous firing from the pressure to the release of the trigger

Technical specifications:
- Easy installation inside Gearbox Version 2, compatible with Tokyo Marui standard
- In most cases, no changes are required to either the replication or the leviathan v2 device
- Uses a micro switch actuated by the sector gear for a perfect timing of semi and full-auto firing
- The cnc trigger included in the package has a screw to move its zero position. thanks to it the shot can be made with a very short pressure of the trigger, this modification is called ""hair trigger""
- Thanks to its advanced electronics leviathan - v2 can be used with any standard gearbox upgrade and rate of fire of the replica
- The harness allows for quick and easy installation and is long enough for all replica types with battery housing in the stock. no welding is necessary
- Power cables are high quality 1.5 qmm (AWG16) with thin and strong MPPE insulation and 0.34 qmm (AWG24) blue signal cable with MPPE insulation
- The external diameter of the power cables is only 2.06 mm and that of the blue wire is 1.24 mm
- The length of the cable between the gearbox and the battery connector is 290 mm
- The

Link:
App Mobile Leviathan by Jefftron per Smartphone iOS e Android
Manuale di installazione per Leviathan - v2 in inglese [pdf, 5.76 mb]
Leviathan by Jefftron Q&A discussion forum su facebook
Guida Video Montaggio in inglese (Youtube)

Safety information:
- The installation of the device inside the gearbox requires advanced technical skills
- Read the instructions carefully before installation to avoid damage
- Short circuits or batteries not connected correctly cause immediate damage to the device which is not covered by warranty. it can also cause the battery to ignite or explode
- Disconnect the battery when you are not using the replica! Otherwise the battery will be completely discharged because the device continuously consumes some energy.
- Do not connect the battery when there are people or animals in front of the firearm
- Do not modify, do not repair, do not wet with any type of liquid, do not cause thermal shock to the device

The Package Contains:
Drop-in leviathan electronic module - v2 with rear wiring, Dean-T connector, 40a mini fuse and faston connectors to the motor
Speed ​​CNC black trigger with screw for zero position adjustment
Screw with washer for fixing the device in the gearbox
Leviathan black sticker 40mm
Foam to hold the device in place
Instruction manual in English