ELECTRIC RIFLE SA-G11 KEYMOD EBB BLACK

Electric rifle sa-G11 keymod ebb

abs polymer Black colour

SPECNA ARMS brand

Features:

polymer receivers

Polymer keymod handguard

standard 20mm upper slide and underbarrel

Transport handle with 20mm slide

blowback system

folding stock

350-round oversized polymer magazine

Adjustable rear sights

battery compartment in the hand guard

mini-tamiya connector

BATTERY AND BATTERY CHARGER NOT INCLUDED

Dimensions:

length 500mm - 715mm

weight 2720g

THE FAMOUS ARMS SPECNA ON THE AIRSOFT MARKET PRESENTS THE SA-G SERIES!

SA-G REPLICAS WITH THEIR LEVEL OF CRAFTSMANSHIP CAN COMPETE WITH REPLICAS FROM THE BEST MANUFACTURERS!

THE G SERIES CONSISTS OF RIFLES IN SEVERAL INTERESTING CONFIGURATIONS, INCLUDING MODELS EQUIPPED WITH AN INTEGRATED SCOPE, BIPOD, OR A KEYMOD HANDGUARD.

THE REPLICA, SIMILAR TO THE ORIGINAL, HAS BEEN MADE OF DURABLE POLYMER, METAL AND, IN THE MOST VULNERABLE POINTS, STEEL (STEEL PARTS INCLUDE SCREWS, PINS AND TACTICAL STRAPS ADAPTERS).

THE REPLICA IS EQUIPPED WITH A 22mm RIS RAIL FORWARD (ON THE TOP AND BOTTOM) AS WELL AS A KEYMOD MOUNT (ON THE SIDES).

THE HANDGUARD CONTAINS THE BATTERY.

THE REPLICA IS CHARACTERISTIC FOR ITS EXCELLENT ALIGNMENT OF THE PARTS AND FOR THE FACT THAT IT WAS MADE OF MATT POLYMER.

THE MOST IMPORTANT ELEMENTS HAVE BEEN JOINED WITH PINS.

THIS WAY IT IS POSSIBLE TO CHANGE SPECIFIC ELEMENTS, FOR EXAMPLE, THE MAGAZINE COMPARTMENT.

THE REPLICA RECEIVER MADE FROM SOLID POLYMER FEATURES AN INDIVIDUAL SERIAL NUMBER, MANUFACTURER MARKINGS AND FIRE MODE SELECTOR COSMETIC SYMBOLS.

THE TOP OF THE REPLICA FEATURES A CLASSIC CARRY HANDLE WITH A 22mm RIS RAIL AND FIXED, ADJUSTABLE IRON SIGHTS.

THE REPLICA IS EQUIPPED WITH A SIDE FOLDING STOCK, WHICH SIMPLIFIES TRANSPORTATION AND OPERATION IN TIGHT CORNERS.

THE METAL BARREL IS EQUIPPED WITH A MUZZLE MOUNTED ON A 14mm CW THREAD.

THE HEART OF THE REPLICA IS MADE UP OF A LIPO READY V3 GEARBOX WITH A MICRO-CONNECTOR INSTALLED.

THE GEARBOX IS FULLY ADJUSTED FOR MODIFICATIONS AND THE IMPLEMENTATION OF A MICRO-CONNECTOR POSITIVELY AFFECTS THE TRIGGER REACTION SPEED AND THE FIRE RATE OF THE REPLICA.

THE REPLICA IS FULLY COMPATIBLE WITH LIPO AND LIFE BATTERIES.

THANKS TO THE BASE MUZZLE VELOCITY OF ~380 FPS PROVIDED BY THE MAIN SPRING INSTALLED BY DEFAULT BY THE MANUFACTURER, THE REPLICA IS PERFECT FOR MEDIUM RANGE OPERATION.

THE REPLICA IS EQUIPPED WITH A QUICK SPRING RELEASE SYSTEM - ENTER & CONVERT.

TO ACCESS THE GEARBOX, ALL THAT IS NECESSARY IS TO REMOVE THE PIN LOCATED IN THE LATCH THAT LOCKING THE STOCK.

THIS WAY, YOU GET ACCESS TO THE MAIN SPRING GUIDE, WHICH CAN BE QUICKLY AND EASILY REMOVED FROM THE BACK OF THE GEARBOX.

THANKS TO THIS SYSTEM, IT IS POSSIBLE TO QUICKLY AND QUICKLY ADAPT THE POWER OF THE REPLICA TO THE CONDITIONS EXPECTED ON THE PLAYING FIELD WITHOUT THE NEED TO HAVE ACCESS TO A WORKSHOP OR A SET OF SPECIAL TOOLS.

THE ENTIRE SPRING CHANGE TAKES 45 SECONDS AND ONLY REQUIRES A SINGLE SCREWDRIVER.

THE REPLICA, SIMILAR TO THE ORIGINAL, HAS BEEN ADAPTED FOR USE BY BOTH LEFT AND RIGHT HAND USERS THANKS TO A DOUBLE-SIDED FIRE MODE SELECTOR PLATE.

THE REPLICA USES AN INTERESTING SOLUTION IN THE FORM OF AN EBB (ELECTRIC BLOW BACK) SYSTEM WHICH SETS THE BOLT CARRIER IN MOTION, INCREASING REALISM AND BRINGING IT CLOSER TO THE ORIGINAL FIREARM.

THE SET INCLUDES A HI-CAP MAGAZINE WITH A CAPACITY OF UP TO 350 BBS.

EACH REPLICA IS SUBJECTED, SINCE IN USE IN THE FACTORY, TO A PRE-DELIVERY INSPECTION VALIDATED BY A SPECIAL CERTIFICATE WITH HOLOGRAM AND AN INDIVIDUAL SERIAL NUMBER ASSIGNED TO EACH REPLICA.